nanoporous graphene which is used as nanosorbent was synthesized by chemical vapor deposition method via porous zinc oxide nanocatalyst. the reaction was carried out using methane as the carbon source and hydrogen as the carrier gas in a ratio of 4:1 at the temperature ranging 900-1050°c for 2-50 min. the product was characterized by scanning electron microscopy, transmission electron microscop...

chemical vapor deposition (cvd) is one of the most popular methods for producing carbon nanotubes (cnts). the growth rate of cnts based on cvd technique is investigated by using a numerical model based on finite volume method. inlet gas mixture, including xylene as carbon source and mixture of argon and hydrogen as carrier gas enters into a horizontal cvd reactor at atmospheric pressure. in thi...

self-assembly of densely packed zno nanorods were grown on porous silicon (ps) substrate by low-temperature chemical bath deposition. the structural and optical properties of the obtained zno nanostructures on ps substrate were systematically studied. the strong and sharp (002) peak compared with other peaks in the x-ray diffraction (xrd) indicated thatzno nanorods formed with superior orientat...

the growth rate and uniformity of carbon nano tubes (cnts) based on chemical vapor deposition (cvd) technique is investigated by using a numerical model. in this reactor, inlet gas mixture, including xylene as carbon source and mixture of argon and hydrogen as  carrier gas enters into a horizontal cvd reactor at atmospheric pressure. based on the gas phase and surface reactions, released carbon...

thin films of sno2 nanowires were successfully prepared by using chemical vapor deposition (cvd) process on quartz substrates. afterwards, a thin  layer of palladium (pd) as a catalyst was coated on top of nanowires. for the deposition of pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors. prep...

carbon nanotubes were synthesized over a series of zn-containing fe/alumina catalysts by chemical vapor deposition method at two reaction temperatures of 850 and 950 °c using methane as a carbon source. catalysts were synthesized by keeping fe concentration constant and varying zn concentration to study the effects of zn. the catalysts were characterized using x – ray powder diffraction and n2 ...

the growth rate of carbon nanotubes in chemical vapor deposition is simulated by using a theoretical analysis of the phonon vibration of the system. simulations demonstrate that the growth rate of carbon nanotubes with larger diameters is smaller because of higher damping factors and carbon nanotube inertia. an optimum temperature for the growth rate is calculated for a carbon nanotube on fe ca...

in this study, we describe the growth of carbon nanotubes on commercial iron nanoparticles without carbon shell (fe (nm), size 2o3 and fe* (nm)/mgo) was carried out by mixing commercial fe* nanoparticles (as catalyst) with al2o3 and mgo powders (as supports)by using ball-milling method. the results show in spite of the fact that ball-milling process can have negative effects on diameter and mor...

chemical vapor deposition was employed to synthesize carbon nanotubes with ni-loaded mcm-41 and mcm-48 as catalysts and acetylene as precursor at 750°c. mesoporous ni mcm-41 and ni mcm-48 molecular sieves were synthesized by a hydrothermal method and were characterized by xrd and n2 adsorption isotherm. the catalytically synthesized carbon materials were characterized with raman spectroscopy, n...

in this paper a chemical deposition procedure for the preparation of lead sulfide thin film ispresented. the details of the preparation method are described. the influence of hydrazine hydrate onthe microstructure and deposition rate of lead sulfide thin film has been investigated. the concentrationof the lead ions in the deposition bath decreases more slowly when the hydrazine hydrate is added...